Technical Services-SUNGOOD TECH
SUNGOOD TECH Focus On Mining Machinery & Well Drilling Equipment
May 22,2026
PDC Cutter Specification White Paper: How to Read and Compare Supplier Datasheets
PDC cutter quotes vary by maker. This paper defines 7 key specs—size tolerance, cobalt (6–16%), diamond grade & more—for true performance comparison.
May 20,2026
Tricone Bit IADC Selection for Copper Porphyry Deposits in the Andes
Andean porphyry Cu (200–320 MPa, CAI 4.5–6.0): use Series 6–7 TCI bits. Sealed bearings (X4/X5/X7) for RC >120 m or CAI >3.5—cut cost/m by ~39%. IADC 637 in oxide zone; 737 below 200–250 m. WOB 8–16 kN, RPM 60–100; ease off at faults. Timely pull prevents cone loss.
May 18,2026
Coal Mine Roof Bolt Drilling: Why Standard PDC Bits Fail
Std PDC bits chip in coal roof bolting due to high-freq micro-impact, not shear. Fix: shorter blades, dense small cutters, reinforced gauge & short steel body.
May 16,2026
Drilling Cost Breakdown for Water Wells in Sub-Saharan Africa
This paper analyzes hard-rock water well drilling costs, shows how bit choice impacts adjacent expenses, and shares field data from three sub-Saharan projects.
May 14,2026
Your First Time Operating the ADMT Series Water Detector: A Step-by-Step Field Guide
ADMT water detector guide for new field crews: zero-experience onboarding from unboxing to curve interpretation—produce usable survey data fast.
May 12,2026
Geothermal Drilling in Indonesia and the Philippines: Which Drill Bits Survive Volcanic Formations?
White paper compares PDC, TSP & TCI bits for Indo–Philippines geothermal wells, detailing failure mechanisms, formation triggers & life-maximizing parameters.
May 10,2026
PDC Cutter Selection for Shale Gas Drilling: Why 1308 Is Not Always the Right Answer
In Sichuan Longmaxi & Texas Barnett shale-gas laterals, 1308 PDC cutters suffer chipping/fracture/delamination in one run, causing premature trips.
May 07,2026
DTH Drill Bit Selection for East Africa's Hard Basement Formations
In East African granite gneiss formations (150–220 MPa), effective water well drilling requires K4-profile or ballistic-button DTH bits at 45–65 bar delivered air pressure, with gauge-protected outer diameters.
May 05,2026
Response of 400SX-32D Water Locator
ADMT series (20 yrs field-proven) matches artificial electrical methods closely, earning wide trust—especially in poor grounding, yielding sharper anomalies.
May 02,2026
3D Ground Scanner vs Traditional Water Detectors: Technology Evolution and Practical Comparison
Understanding what these systems measure—and how they compare to established geophysical methods—is vital for professional groundwater/mineral exploration buyers.
Contact Us
ASK FOR A QUICK QUOTE
Would you like to know more about our products? Please fill out the form. Alternatively, you can send us a detailed list of requirements and we will get back to you within 1 working day.
Transportation
Support air, land and sea transportation
Customization
Offering options for customers to customize
Enjoy A Discount
Customers can negotiate the purchase price
Email:
About Us
We provide efficient and reliable solutions to customers around the world and have won the trust and praise of customers around the world.
